kus saab sellisele karpale kollektorit.http://www.scooter-attack.com/index2.php?lang=e ärge näkku lööge
Selliseid asju pole mõtet kirjutada, minutada pole veel küimuse eest kannaga näkku saadud. Üldiselt ma tollest tjuuning lehest ei saa sittagi aru ja ei leidnud su karpat aga kas sa Eesti poodidest oled küsinud enamustest mis sinu linnas asuvad. Iseenesest enamlevinud kollektorid saab vabalt eestist kah. Helista/kirjuta ka mulgimotosse ja loe oma karpa andmed neile ette. www.mulgimotoari.ee
Stage6 PWK 24mm Racing Carb The 24mm Stage6 carburettor type PWK looks much larger and bulkier than other common carbs. It also is a super performer and thanks to its large float bowl there wont be any risks of lean mixtures being created on tight bends. The carb is equipped with a power jet option which is helpful at full throttle. For 70cc sport cylinders we recommend 21 to 24mm, for midrace or racing cylinders you can chose up to 28mm to get the last out of your cylinder. Fitting diameter at the intake manifold is 34mm and at the air filter connection it's 49mm. Of course you can get most of the replacement parts from Scooter Attack. Every kit contains some information about which jets to use with Stage6 Sport and Racing cylinders. With Piaggio engines you can use the Hebo intake manifold, with Minarelli engines we recommend to use a Stage6 teflon coated intake manifold. Please keep in mind that due to the large construction design, some models (e.g. Aprilia SR50) can require a lot of work to make them fit. Attention: carburettor comes with fuel and vacuum connection, but not with oil connection, so you will have to convert to petroil lubrication! For Peugeot scooters, intake system S6-3217500 and fitting rubber flange S6-32ET032 is necessary!! ei tea kas pilti läheb vaja.
